This product is not available for purchase online. Please
Contact Us
for pricing & purchase options.
To bind edges with 1/4" (6 mm) Bias Binding, cut a 1" (24 mm)
wide bias strip of light weight fabric, or use packaged narrow
double fold Bias Binding. Straight stitch, length 2.5, or zigzag or
decorative stitch at desired length.
Cut the end of the bias tape to a point. Insert the bias tape from the outside of the funnel
guide, into the slot and pull it down under the foot.
Place the edge to be bound into the groove on the left side of the funnel guide.
Adjust needle position as needed or to adjust the position of the binder funnel/guide,
loosen the screw on the top of the foot and position the funnel guide as needed.
Specifications
Snap on Bias Binder.
Cut the end of the bias tape to a point. Insert the bias tape from the outside of the funnel guide, into the slot and pull it down under the foot.
Place the edge to be bound into the groove on the left side of the funnel guide.
Adjust needle position as needed or to adjust the position of the binder funnel/guide, loosen the screw on the top of the foot and position the funnel guide as needed.